These popular sleeves are widely used to adjust caster and/or camber on many Ford and Mazda 2/4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 or 88830 sleeve puller to remove the existing sleeve. To save time during alignment, use 23199 zero degree sleeve to determine initial readings, then install correct sleeve. Note: Sleeves adjust to a smaller degree on Ford 4WD light trucks.
Series 2WD Adjust 4WD Adjust
Part # Total Change Total Change
23181 .25 degree .20 degree
23182 .50 degree .40 degree
23183 .75 degree .60 degree
23184 1.00 degree .75 degree
23185 1.25 degree .90 degree
23186 1.50 degree 1.10 degree
23187 1.75 degree 1.25 degree
23188 2.00 degree 1.40 degree
23189 2.25 degree 1.60 degree
23190 2.50 degree 1.80 degree
23191 2.75 degree 2.00 degree
23192 3.00 degree 2.25 degree
23193 3.25 degree 2.50 degree
23194 3.50 degree 2.75 degree
23199 0.00 degree
To save time during alignment, use the 23199 zero sleeve to determine initial readings.
Adjustment range: Cam./Cas. ±.25 degree to ±3.50 degree
Installation time: .5 hr/side
Required: 1 per wheel
Recommended Tools
77880 - Sleeve Puller,
88830 - Sleeve Puller,
87175 - Special Socket
Applications
Ford RWD:
1989 - 90 Bronco II
1992 & Up E150, E250, E350, E450
2000 - 05 Excursion
1978 - 96 F150
1998 & Up F250, F350 Twin I-Beam
1987 - 98 F250, F350
Ford 4WD:
1990 - 90 Bronco II (Late 90-Dana 35)
Ford RWD/4WD:
1991 - 94 Explorer
1990 - 97 Ranger
Mazda RWD/4WD:
1994 - 97 B-Series Pickup
1991 - 94 Navajo​​​​​​​
