Log Out Log Out Log Out
Log Out
Need help? Reach us at 1-800-525-8888 Live Support
My Shopping Cart
Your shopping cart is empty
1-800-525-8888  

 

 

 
SLEEVE CAMB/CAST 4WD FORD 80 UP 1-1/2 DEG Ascot  Specialty Products 23106
Video

SLEEVE CAMB/CAST 4WD FORD 80 UP 1-1/2 DEG

Item # 23106
          
Log in to see
prices
Brand Name: SUP
  Add to Shopping List
  Save For Later
  Share

Overview

SLEEVE CAMB/CAST 4WD FORD 80 UP 1-1/2 DEG

Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve 23109 or 23139 or to determine the change needed, then install the correct sleeve. To adjust, the sleeve may be lifted and rotated 1/8 turn.

23100 Set - Contains 1 each: 23101, 23102, 23103, 23104, 23105, 23106, 23107, 23108, 23109

Part No. Total Change
23101 .25 degree (1/4 degree)
23102 .50 degree (1/2 degree)
23103 .75 degree (3/4 degree)
23104 1.00 degree (1 degree)
23105 1.25 degree (1-1/4 degree)
23106 1.50 degree (1-1/2 degree)
23107 1.75 degree (1-3/4 degree)
23108 2.00 degree (2 degree)
23109 0.00 degree (0 degree)
23111 2.25 degree (2-1/4 degree)
23112 2.50 degree (2-1/2 degree)
23113 2.75 degree (2-3/4 degree)

Adjustment range: Camber/Caster +/-.25 degree to +/-2.75 degree
Installation time: .5 hr/side
Required: 1 per wheel

Recommended Tools: 77880 - Sleeve Puller, 88830 - Sleeve Puller

NOTE:
To save time during alignment, use the #23109 or #23129 zero sleeve to determine initial readings.


Applications
Ford 4WD:
1980 - 96 Bronco - Full Size
1980 - 96 F150
1980 - 98 F250, F350
 

Specifications

  Product NameSLEEVE CAMB/CAST 4WD FORD 80 UP 1-1/2 DEG
  Brand NameSUP
  Item #23106
  Weight0.45 lbs

Videos

Customers Who Viewed this Item also Selected

In This Category

ADJ BALLJOINT HONDA/ACURA
Out of Stock 
ADJ REAR CAMBER ARM
Out of Stock 
ADJ REAR CAMBER ARM
Out of Stock