This sleeve changes camber and caster on many older model turkcs and SUVs with Dana 44 or GMC 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve. Determine the change needed and replace the existing sleeve with the correct one.
#4169 spanner socket is required for sleeve removal.
Rotate sleeve to fine tune camber/caster adjustment. One sleeve covers one side of vehicle.
Estimated Installation Time - .5 hr/side
Part Number / Total Change
#23002 / . 25 degree (1/4 degree)
#23004 / . 50 degree (1/2 degree)
#23006 / . 75 degree (3/4 degree)
#23008 / 1.00 degree (1 degree)
#23010 / 1.25 degree (1-1/4 degree)
#23012 / 1.50 degree (1-1/2 degree)
Applications
Chevrolet/GMC 4WD:
1970 - 87 K10, K15, K20, K25
1969 - 91 Suburban
1969 - 91 Blazer (K5), Jimmy (K5)
1958 - 87 K30, K35
Dodge 4WD:
1972 - 93 W100, W150, AW150, W200, W250
1974 - 87 Dodge Ramcharger
Ford 4WD:
1966 - 79 F100, F150
1973 - 79 F250
1971 - 79 Bronco
International 4WD:
1972 - 75 1/2 & 3/4 ton Pickup
1973 - 80 Scout II
Jeep 4WD:
1974 - 83 Cherokee
1945 - 86 CJ
1966 - 73 Jeepster, Commando
1974 - 84 Pickup
1982 - 86 Scrambler
1974 - 91 Grand Wagoneer
Plymouth 4WD:
1974 - 81 Trailduster
