Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve 23109 or 23139 or to determine the change needed, then install the correct sleeve. To adjust, the sleeve may be lifted and rotated 1/8 turn.
Part No. Total Change
23131 .25 degree (1/4 degree)
23132 .50 degree (1/2 degree)
23133 .75 degree (3/4 degree)
23134 1.00 degree (1 degree)
23135 1.25 degree (1-1/4 degree)
23136 1.50 degree (1-1/2 degree)
23137 1.75 degree (1-3/4 degree)
23138 2.00 degree (2 degree)
23139 0.00 degree (0 degree)
Adjustment range: Cam./Cas. ±.25 degree to ±2.00 degree
Installation time: .5 hr/side
Required: 1 per wheel
Recommended Tools: 77880 - Sleeve Puller, 88830 - Sleeve Puller
Applications
Dodge RWD:
1994 - 99 3500 Ram w/Mono Beam
Dodge 4WD:
1994 - 99 2500HD, 3500 Ram
Ford RWD/4WD:
1999 - 04 F450, F550
1999 - 04 F250, F350 Solid Axles/Leaf Springs
Ford 4WD:
2000 - 05 Excursion
1992 - 98 F350 Crew Cab
